Linden L48MTV17a, Инструкция по эксплуатации

Страница: 26 / 36

Advanced Features
24
9. PVR function
1). Prepare to record the program
Before the PVR function can be used, a suitable USB storage device (USB flash-drive or USB
hard-drive) must be connected to the USB socket on the rear side panel of the TV. The USB
storage device should only be connected or disconnected when the TV is switched off. The
USB PVR function relies on the use of high quality USB drives, with higher speed models
likely to provide improved performance.
From the Option Menu enter into the PVR File System and choose "check PVR File
System". Click "OK", and wait until "checking" changes into "Success".
Note: please check the result marked "Speed". If it is "FULL HD support", that means the
speed of your USB device is suitable for time shift and record functions. If not, please format
the device, to make sure the USB device is capable of handling the recording functions. The
default "Free Record Limit" is 6 hours, if the space on the disk is big enough. If the space is not
big enough, the record time will be shorter, depending on the capacity of the device.
During the "check PVR File System" checking, please do not choose any other operation until
it is finished.
The recordings have to be done from within the TV PVR system. The recordings can only be
played in the same TV, and generally not in any other kind of devices (computer, DVD, etc...)
which are not compatible with the .TS file format.
In order to carry out any kind of recording, the TV will oblige you to format the connected
USB device to store the recording. The High Speed format option is recommended for better
HDTV recording results.
WARNING. WHEN YOU FORMAT THE EXTERNAL USB DEVICE YOU WILL LOSE ALL
THE FILES
AND INFORMATION STORED ON THE DEVICE.
From the OPTION MENU, enter into the PVR File System as below:
Select Disk
USB 0
Disk C:
MENU
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
Select Disk C:
< >
OSD Language English
OPTION
Audio Languages
Subtitle Languages
Hearing Impaired
PVR File System
Restore Factory Default
HDMI CEC
24
Advanced Features
Select Disk: select which USB drive type to save the recorded file onto, then press
OK to return to the PVR menu.
Warning! All data will be lost.
Start Exit
Format disk
Format disk
Do not unplug USB device.
Formatting,please wait
Format disk
MENU
Check PVR File System Checking
Free Record Limit 6 Hr.
Select Disk C:
USB Disk Pass
Format Pass
Time Shift Size All
Speed Checking
MENU
Check PVR File System SUCCESS
Free Record Limit 6 Hr.
Select Disk C:
USB Disk Pass
Format Pass
Time Shift Size All
Speed HD support 2048 KB/s
Time Shift Size
Time Shift Disk Size 512 MB
SB 14 Mins
HD 4 Mins
Check PVR File System: checks if the PVR File System set up will work with your USB
device or not.
Format: Refer to the details on formatting on page 21 before using this option for the
first time. Once you have selected the type of formatting of your USB storage device,
your TV will show various progress screens (see below).
When the Format process has finished, you can then use the “Check PVR File System” option
to show the speed ability of your USB storage device. Press EXIT to return to the TV mode.
If you selected the "Hi Speed FS" format mode, you can then change the Time Shift memory size.
Remember to set the Time Shift size to be smaller than the capacity of your USB storage device,
or the Speed test may report an error.
2). Recording a DTV program
When viewing a DTV program, press the "
●
REC" button on the remote control and the
record control tab will pop up and the PVR will commence recording. Click the “
●
REC"
button again and the record control tab will disappear while the "REC" icon will remain on
the top left of the screen. It will disappear when you click the "stop" button on the remote
control, and the PVR will finish recording.
PVR recording of DTV programs can also be accessed thru the EPG, and future recordings
can be accessed using the Schedule List option. Refer to the EPG Menu section on page 22.
3). Playing back the recording
In the USB drive, the recorded program will be saved in the folder "_MSTPVR" on the device. To play
back the.TS format files, use the DMP (Digital Media Player) function as shown on page 27, and select
Movie as the type of file to play back. Alternatively, press the Index button on the Remote Control to
display the Recorded List, which shows the name of recorded DTV material on the attached USB drive.
The order of the recordings can be selected by repeatedly pressing the Index button to view in
Program, Channel, or Time order.
25
Advanced Features
PVR Function
WARNING. WHEN YOU FORMAT THE EXTERNAL USB DEVICE YOU WILL LOSE ALL THE FILES AND
INFORMATION STORED ON THE DEVICE.
< >
OSD Language English
OPTION
Audio Languages
Subtitle Languages
Hearing Impaired
PVR File System
Restore Factory Default
H
Store Mode
DMI CEC
L48MTV17a_IB_170814_Annie.indd 24 14/8/17 下午5:23