Linden L48MTV17a, Инструкция по эксплуатации

Страница: 7 / 36

TELETEXT and SUBTITLES
TEXT
DIRECT ACCESS
TO THE ITEMS
Enter the number of the page required using the 0 to 9 up/down.
Example: page 120, enter 120. The number is displayed top left, the
counter turns and then the page is displayed. Repeat this operation to
view another page. If the counter continues to search, this means that the
page is not transmitted. Select another number.
Coloured buttons correspond to the colours at the bottom of the screen.
The 4 coloured keys are used to access the items or corresponding
pages. The coloured areas flash when the item or the page is not yet
available.
SELECTING A PAGE
This is used to call or exit teletext modes during ATV reception.
The summary appears with a list of items that can be accessed.
Each item has a corresponding 3 digit page number. If the
channel selected does not broadcast teletext, the indication 100
will be displayed and the screen will remain blank (in this case,
press the CH+ or CH- buttons to check another text page,or else
exit teletext and select another channel).
Teletext is an information system broadcast in certain countries which can be consulted
like a newspaper. It may also offer access to subtitles for viewers with hearing problems
or who are not familiar with the transmission language (Refer to your local TV guides or
internet program lists to determine if Teletext is used in your area.)
SUBTITLE
Press this button to select the available sub-title languages during DTV
reception (if any), and to select Subtitle On or Off.
Once you have connected your TV antenna and other AV playback equipment
(eg. CD, DVD, Blu-ray player) to the appropriate input sockets on the rear and
side of the TV, you will need to be comfortable with selecting several basic
operations before setting up your TV using the Menu system.
Firstly, the TV has two power modes – Standby and On. In Standby mode, the TV
is powered up, but awaits a "power On" command from either the Remote
Control or from the Standby push-button located on the lower right-hand side of
the TV.
To switch the TV from off into Standby mode, activate the main On/Off rocker
switch located at the bottom mid-right side of the TV, and wait for the Red power
indicator on the bottom right of the TV to light up. Then, press the red power
button on the Remote Control to fully activate the TV (ie. move from Standby to
On mode). The power LED on the front of the TV will change from Red to a blank
colour when the TV is fully powered up, and after approx 10 seconds the screen
will become active and can be commanded using the Remote Control.
Getting started
Press : You will obtain :
4
Guide to the Television
5
Responsible Disposal of the Packaging
The packaging of your television has been selected from environmentally friendly materials and can
usually be recycled. Please ensure these packing materials are disposed of correctly.
Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all
packaging materials are out of reach and are safely disposed of. Please ensure they are offered for
recycling rather than throwing these materials away.
Responsible Disposal of Appliance
At the end of its working life, do not throw this television out with your household rubbish. An
environmentally friendly method of disposal will ensure that valuable raw materials can be recovered
and used again.
Electrical and electronic appliances contain materials and substances which, if handled or disposed
of incorrectly, could be potentially hazardous on the environment and human health.
Observe any local regulations regarding the disposal of electrical consumer goods and dispose of
it appropriately for recycling. Contact your local authorities for advice on recycling facilities in your
area.
The plug must be rendered useless and the cable cut off directly behind the appliance or the machine
to prevent misuse.
Caring for the Environment
L48MTV17a_IB_170814_Annie.indd 5 14/8/17 下午5:23