Lincoln Electric 12879, Руководство оператора

Страница: 33 / 56

OPERATION APEX
®
3 SERIES MIG PENDANT MANUAL
B-22
Service Menu
The Service Screen allows for advanced welding options.
There are five menus available in the Service Screen:
Version, Motion, Faults, Settings and Input Tests.
Version
The version option of the service menu shows the user
information about the installed software and hardware.
Paging through the screens can be done using the Next
Selection button and the Previous Selection button – see
FIGURE 27 - Service Screen Versions
Motion
Motion controls allows the user to select certain mo-
tions and behaviors of the weld system – see
FIGURE
28 - Motion Controls Screen
– for available options.
Service Motion items are:
Steering Increment - Changes the distance the oscil-
lation axis will move for each click of the steering knob.
Head Orientation
- Rotating the orientation of the
torch relative to the weld head requires changing the
system settings and physically inverting the weld head.
The setting must match the physical orientation.
Torch Retract Distance - Changes how far the torch
retracts at the end of the weld. This allows for great-
er clearance, enabling a return home to trim the wire
before restarting.
WFS Test - The APEX system performs all calibrations
internally. However, in order to comply with welding
standards, the system allows for verification. The WFS
Test will produce a desired amount of wire for a preset
length of time for verification.
Travel Test - The APEX system does all calibrations
internally. However, in order to comply with welding
standards, the system allows for verification. Travel
Test will travel for the specified distance for verifica-
tion.
The distance must be measured on the track
ring gear or on a flat track.
FIGURE 27 - Service Screen Versions
FIGURE 28 - Motion Controls Screen
FIGURE 27 - Service Options Page