Lincoln Electric 12879, Руководство оператора

Страница: 15 / 56

OPERATION APEX
®
3 SERIES MIG PENDANT MANUAL
B-4
System Log In
When powered on, the system will go through a
self-calibration routine. Make sure the torch is free to
move before starting the system.
When the calibration routine is complete, the user
will be presented with a Log In Screen – see
FIGURE
3 - Log In Screen on page B-1 and FIGURE 6 -
Change User
. The system requires a four-digit user
code to log in.
Fast Movement
Fast movement using the steering knob is enabled on
this screen – see
FIGURE 5 - Fast Movement.
Use
the steering knob or left and right toggles for naviga-
tion and selection.
Use the left toggle or press the steering knob to
change from one variable to the next. Use the right
toggle or turn the steering knob to change the selected
variable.
Press the Enter Selection button when the complete
four digit user code has been entered. Once a four dig-
it code is accepted, the system automatically moves
into the default Idle screen – see
FIGURE 7- Idle
Screen Default . This screen is shown when a supervi-
sor logs into the system. Logging in as an operator will
default to the Program Load Screen.
FIGURE 5 - Fast Movement
FIGURE 7 - Idle Screen Default
FIGURE 6 - Change User