Lincoln Electric 12879, Руководство оператора

Страница: 29 / 56

OPERATION APEX
®
3 SERIES MIG PENDANT MANUAL
B-18
Mode Select
The weld mode is determined by the wire size, type,
process and type of gas being used. Refer to the Pow-
er Wave
®
operator’s manual for additional information
about weld modes. The system can be a guide when
the user is not sure which mode is appropriate for their
application.
Pressing the Mode selection button will take the user
to the Manual Mode Select Screen.
The user is prompted to select the wire size, type,
process and then gas type. Mode Select guides the
user through the settings. Selecting a wire diameter
moves to wire type. See
FIGURE 20 - Manual Mode
Select.
Selecting wire type leads to a specific process and
then to gas selection.
Each selection filters the list of available weld modes
to match your application. A cored wire would not
allow the user to select an STT
®
process.
The selected mode is displayed on the left side of the
screen – see
FIGURE 21 - List Mode Screen . These
processes are accessed from the Power Wave, and
are updated with the standard Power Wave updates.
FIGURE 20 - Manual Mode Select