Limaco ULM-3D Series, Руководство по эксплуатации и установке

Страница: 19 / 56

Fig. 4.5. Device installation. Tank made of non-conductive material.
4.2 Position for installation
The best location and orientation of level transmitters in the space depends on the
dimensions and structure of the tank, the number and location of product filling and
unloading points. Before ordering level transmitters, the number of transmitters in-
stalled on each tank, installation location and the orientation of transmitters in space
(sensor rotation about its axis and tilt) shall be agreed.
For the best choice of installation location, provide the following data on the in-
tended use:
1. The name of measured product;
2. Product density;
3. Tank shape (cylindrical bin, rectangular bin, open dump, a dome-shaped tank,
etc.);
4. The dimensions of tank and its components (for example, in a cylindrical tank,
the dimensions of cylindrical and conical parts.). Provide drawings or sketches with
dimensions;
5. Presence of internal structures. Specify the location of internal structures, if any,
indicating the dimensions;
6. Possible installation locations. Roof thickness and roof material.
7. Specify all existing filling and discharge points of the tank. Provide drawings or
sketches with dimensions;
19
RE_ULM3DX_18_02_20