Limaco ULM-3D Series, Руководство по эксплуатации и установке

Страница: 14 / 56

Fig. 3.9. The direction of the measuring beams of level transmitter channels relative
to the vertical axis of the level transmitter.
3.6 Acceptance, packaging, transportation, and storage rules
During the acceptance of equipment, compliance with the following requirements is
determined:
- the completeness of level transmitter corresponds to the one specified in the data
sheet;
- the level transmitter is free from mechanical damages that prevent its use;
- the ID of level transmitter corresponds to the one specified in the device data
sheet;
- labels and symbols on the level transmitter are clear and meet the requirements of
operating manual;
- the data sheet contains a QC stamp and the stamp of state verification officer in
case of verification.
The level transmitter that has not passed visual inspection is not admitted to opera-
tion.
The level transmitter is supplied in a package that protects it during transportation.
The packaging is made of cardboard, which is a recyclable material. In some cases,
PE foam and PE film may be used, which are recycled at special processing plants.
The level transmitter may be placed in its original packaging in wooden or plywood
boxes during transportation.
The storage of level transmitter in the warehouses of the manufacturer and the con-
sumer shall meet storage conditions 3 as per GOST 15150-69. The shelf life in the
original packaging is 20 years.
Unpacked level transmitter shall be kept on racks.
14
RE_ULM3DX_18_02_20