6. Area Title Setting
The area title function lets you display a direction indicator that appears in the picture to indicate
the direction of the location being shown on the screen. Text can also be displayed in the place of
the direction indicators, if desired. The direction indicators are N(north), NE(northeast), E(east),
SE(south east), S(south), SW(southwest), W(west) and NW(northwest).
Push joystick down to select <AREA TITLE>, and then push joystick left or right to select area
title setup.
OFF : Turn off display of area title direction indicators and text.
NESW : Displays direction indicators. Select(NESW) and pressing the
button will display
the position(NESW) setting menu. Which you can use for configuring detailed settings.
USER : Display user input text. Selecting(USER) and pressing the
button will display the
area title(USER) selection menu, which you can use for configuring detailed settings.
(1) When NESW is selected
After selecting NESW, you can use the joystick to configure detailed setting. Once you set
the northerly(N) direction for camera, all other directions are displayed automatically.
(2) When USER is selected
After selecting USER, you can use the area title USER setting menu to configure detailed
settings. You can use following procedure to configure direction settings, and to input text
associated with a particular direction indicator.
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
AREA NUMBER
<EDIT POSITION>
<EDIT TITLE>
CLR AREA
BACK
EXIT
1
ABOVE NUM
USER AREA
1. Push joystick down to select <AREA NUMBER>, and then push joystick left or right to
select area number. (1~6)
2. Push joystick down to select <EDIT POSITION>, and then press
key into Area
Position setting.
Push joystick left, right, up or down to start position, and ZOOM IN , ZOOM OUT to
adjust zoom, then press
key to confirm.
3. Push joystick down to select <EDIT TITLE>, and then press
key into title setup.
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CHARACTER
EDIT AREA
COMMAND
SPACE
BACKSPACE
COPY
OK
CANCEL
ID FOR AREA NUM. 01
35
