Recalling Preset Positions
Once the required preset positions have been stored in a dome, they may be quickly recalled,
returning the dome to exact position.
To recall 1st Preset Position: Push key 1 followed by PRESET key.
The dome will move to that position in speed of 360 /sec.
Ex. To recall 1st preset position
To recall 128th preset position
: 1 PRESET keys
: 1 2 8 PRESET keys
1 F4
1 2 F4
3 4 F4
1 2 3 F4
2 3 4 F4
1 2 3 4 F4
Setting Preset Group
The purpose of setting preset group allows the management of the 16 preset positions before Auto
Scanning. The first 16 preset positions of each dome are separated into 4 groups. Preset group must
be set for the auto pan reference.
Group 1 includes: 1st 2nd 3rd and 4th preset positions.
Group 2 includes: 5th 6th 7th and 8th preset positions.
Group 3 includes: 9th 10th 11th and 12th preset positions.
Group 4 includes: 13th 14th 15th and 16th preset positions.
To set up group 1: Push key 1 followed by F4 key.
Ex.
To set Group 1
To set Group 2,3
To set Group 3,4
To set Group 1,2,3
To set Group 2,3,4
To set Group 1,2,3,4
POWER
F1
F2
F4
F3
1
PRESET1
PRESET2
FAST
PRESET3
2
3
SETUP
MON
6
5
4
CAM
9
8
7
ENT
0
CLR
PRESET
ESC
AUX LIGHT
CTRL2
CTRL1
AUTO
SPRAY
WIPER
SEQ
ZOOM
IN
FAR
FOUCS
IRIS
O
NEAR
OUT
PAN
RESET
ALARM
ZOOM
FOUCS
IRIS
C
AUTO
AUTO
FOUCS
IRIS
CAM ESC
180 REV
CAM SETUP
LENS SPEED
1
2
3
4
5
6
7
Changing Preset Data
In order to change any preset position from the one stored, the dome must first be sent to that
preset position.
To change the 4th preset position of the Dome number 3, perform the following steps:
Push 3 CAM to select Dome 3
Push 4 PRESET to go to 4th preset position
Move joystick to bring camera to the desired view position.
Adjusting lens
Setting preset speed
Setting dwell time
Store Data
(Please refer to preset position setting for step
~
)
*
*
28
