Wall Mounting (Fixed Bracket)
Connect RS-485 cable.
Connect Video signal
cable.
Connect DC12V of power
cable. (Suggest to use the
ADAPTOR from the
factory)
TXDI+
TXDI -
TXDO+
TXDO -
GND
VIDEO OUT
Fixed bracket first, and
pull control cable and
power cable from bracket
cable outlet.
Take out connecting cable
model on body bottom.
Connect control cable and
power cable with
connecting cable model.
Take connecting cable
model through the hole of
metal clips.
Configure the metal clips
on bracket, and pull all of
control cable into the
bracket.
Tighten the three screws
to fix bracket.
Loose the screw of bottom
chassis.
(Don't need taking out the
screw)
16
Step 4
Connection
Step 1
Fix The Bracket
Step 2
Fix The Metal Clips of Bracket