To modify password after editing password completed, please get in <EDIT PASSWORD> again
to edit.
If password function is ON, previous passwords have to enter on the setting menu first, and then
do modifying password.
4. Modify Password
After password function is ON, press
key to display frame of input password on the screen.
When protocol is MLP1, push joystick up or down to select number
0~9 and press
key to confirm. Select numbers will become to
"*".
Repeat above steps until passwords have been completed. If
password is correct, setting menu will be displayed.
When protocol is MLP2, press number 0 ~ 9 key on the keyboard to
input, and then press
key to confirm. If password is correct,
setting menu will be displayed.
Note: If not enter password within 10 sec or input password is wrong, "Invalid password" will
be show on the screen. Primary password is "1111".
5. Input Password
CAM SETUP
CTRL 1
ENT
IRIS
O
ENTER PASSWORD
Restore Factory Defaults
After getting in dome setting menu, push joystick down to select <FACTORY INITIAL>, and then
press
key into factory initial setting.
CAM SETUP
CTRL 1
1. Display the Restore Function Initialization Menu
RESTORE
BACK
EXIT
ALL
RESTORE FACTORY DEFAULTS
48
Push joystick down to select <RESTORE>, and then push joystick
left or right to select <ALL>.
Press
key to confirm, and "Are you sure continue" will be
displayed on the screen.
Press
key again, and then to do factory initialization for all.
Note: "PLEASE WAITING FACTORY INITIALIZATION"will show on the screen after
confirmation.
2. Factory Initial for All
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
PLEASE WAITING
FACTORY INITIALIZATION
