Push joystick down to select <SPEED>, and then push joystick left or right to select speed of
preset. (1 ~ 120 deg/sec)
Note: Only preset No.1~16 can set speed, because group of auto pan can only edit preset No.
1~16. Other preset numbers can't set speed.
6. Speed Setting
Push joystick down to select <CLR PRESET>, and then push joystick left or right to select
<ABOVE NUM> or <ALL>. Then press
key to confirm.
ABOVE NUM.: Only cancel parameter of allotted preset
ALL: Cancel parameters of all presets (1~128)
7. Cancel Preset
CAM SETUP
CTRL 1
45
Tour Function Setting Menu
After getting in dome setting menu, push joystick down to select <TOURS>, and then press
key into tours setting menu.
CAM SETUP
CTRL 1
1. Display the Tour Setting Menu
Push joystick down to select <NUMBER>, and then push joystick left or right to select Tour1 or 2.
2. Tour Number Selection
NUMBER
<EDIT TOUR>
<CLEAR ABOVE NUMBER>
DWELL TIME
SPEED
BACK
EXIT
1
5 sec
120 deg/sec
TOURS
Push joystick down to select <EDIT TOUR>, and then press
key into edit tour setting.
Push joystick up or down to select number. When joystick down to last line, push joystick down
again to get in next table of page. Each tour table can edit 32 presets.
Push joystick left or right to select preset. (1~128)
Press
key to confirm, and push joystick to select <BACK>, then press
key again
to back to tours setting, or push joystick to select <EXIT>, and press
key to exit setting
menu.
3. Edit Tour
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
1.
2.
3.
4.
5.
6.
7.
8.
BACK
EXIT
TOUR TABLE 1 - 1/4
1. PRESET 1
2. PRESET 6
3. PRESET 8
4.
5.
6.
7.
8.
BACK
EXIT
TOUR TABLE 1 - 1/4
