If the connection is established properly, two green lights placed next to the
fields used to choose the
serial port
and set the
node ID
come on, while the
CONNECT
button disappears and is replaced by the
DISCONNECT
button.
Furthermore the hardware version and the software version as well as the model
of the device are shown in the
Slave settings
box.
The green light next to the
COM
item indicates that the COM port is open
successfully.
The green light next to the
Node ID
item indicates that the DRIVECOD unit has
been detected and the communication has been established successfully.
5.3 “Operative mode” page
Press the
OPERATIVE MODE
button in the sidebar menu to start programming,
controlling manually and monitoring the device. The following page will appear.
When you first enter the
Operative mode
page, for safety reasons the RD6 unit
is necessarily in an emergency condition: therefore the
Emergency
button is
highlighted in red while the
Alarm
and
Emergency
warnings in the bottom
left-hand
State
and
Alarms
boxes are lit red; furthermore the LED L7 in the RD6
unit is solidly lit red. To restore the
Idle
state of the device, press the
MAN RD6 MB E 1.1
Quick reference
27 of 92
RD6 Modbus®
