EM58 – HS58 - HM58 MODBUS TCP/IP
NOTE
The registers in the
Encoder Information
page cannot be changed even though
they are read-write access registers. To change the set values please enter the
Set Registers
page (see on page 81).
Press the
Homepage
command to move back to the Web server Home page.
8.5 Setting the Preset value
Press the
Set Preset Value
command in the left navigation bar of the Web
server Home page to enter the
Set Encoder Preset
page and set/activate a
Preset value. For complete information on the preset function please refer to
the
A soon as you press the
Set Preset Value
command a warning message (
Are
you sure you want to change Preset Value?
) appears on the screen: it warns
the operator about the awkwardness of the operation, thus he is required to
confirm the procedure before continuing.
Figure 7 - Entering the Set Encoder Preset page
Press the
OK
button to proceed, otherwise press the
EXIT
button to exit the
procedure. The
Set Preset cancelled!
message will appear on the screen. Press
the
OK
button to move back to the Web server Home page.
MAN EM58_HS58_HM58 MT E 1.1.odt
Integrated web server
79 of 104
Содержание EMC58 MT
Страница 101: ...This page intentionally left blank ...
Страница 102: ...This page intentionally left blank ...
Страница 103: ...This page intentionally left blank ...