LightSand S-2500B, Инструкция по установке и эксплуатации

Страница: 68 / 86

A-18 S-2500B Gateway
Configure IP Routing Table Data
These commands are used for creating or deleting an IP Routing Table entry for an interface
that already exists.
The following shows the level-specific prompt, the “?” request and the list of valid commands:
gateway/config/ip/route# ?
Sub-Context:
(none)
Cur-Context:
create <if-name> <dest-ipaddr> <dest-netmask>
delete <if-name> <dest-ipaddr> <dest-netmask>
Example : Create an IP routing table entry for the interface with the given name, IP address
and net mask.
gateway/config/ip/route#
create < InterfaceName > 10.0.0.1 255.255.255.0
For a list of valid interface names, refer to the routing information example in Show
System Level IP Data, on page A-23 .