LightSand S-2500B, Инструкция по установке и эксплуатации

Страница: 34 / 86

3-6 S-2500B Gateway
Creating a Redundant Pair
To prevent loss of service due to equipment failure, two S-2500B Gateways can be linked as a
redundant pair using the LightSand Gateway Redundancy Protocol (LGRP). For a complete
discussion of LGRP redundant pairs, please refer to
Appendix B: Redundancy . (Appendix B is
currently under development.)
Configuring the Node Characteristics
The following “ ? ” command displays the list of node-specific items that can be configured.
gateway:> config system ?
Sub-Context:
Cur-Context:
activate
name <name>
description <description>
ipaddr <ip-address> <net-mask>
location <location>
contact <contact>
date&time
restart-mode <restart-mode-option>
enable-rip <if-name>
disable-rip <if-name>
Example : Set the gateway’s name and activate the change:
gateway:> config system name
< NewGatewayName >
gateway/config/system# activate
To change the type of a port after it has been configured, first deactivate the system with
restart-mode “warm-inactive”, change the type, and then reactivate.
Example : Deactivate the system, change a port type, and reactivate:
gateway:> config system restart-mode warm-inact
gateway/config# port efc 1 type fc
gateway/config# system activate
Changes are in effect until the gateway is given a restart-mode of “cold,” which restores the
factory-set default configuration.