LightSand S-2500B, Инструкция по установке и эксплуатации

Страница: 22 / 86

2-2 S-2500B Gateway
The S-2500B communication ports include the following:
• One WAN (Wide Area Network) port, WAN 1 , which is configured to SONET
protocol.
• Three EFC (Ethernet or Fibre Channel) ports, EFC 1 , 2 and 3 . These can be
configured to FC (Fibre Channel) or GbE (Gigabit Ethernet). These ports are used for
connecting to devices such as fibre channel or GbE switches.
• Ethernet ports 1 and 2 . Port 1 is used for connecting to the LAN or out-of-band
network, and Port 2 is used for a possible LGRP link to a redundant gateway.
• One Serial port, which can connect to a computer or console for using the CLI.
The LED indicators are described by the following label on the S-2500B back panel:
Figure 2-2: S-2500B LED Configuration Label
• Alarm : amber means at least one alarm is present of critical or major severity; off
means no significant alarms are present.
• SONET Link/Act : on means the SONET link is enabled; off means disabled.
• ON = FC, OFF = GbE : left to right for Ports 1, 2, 3. On means the port is configured
for FC, off means it is configured for GbE.
• Link / Act, FC / GbE : left to right for Ports 1, 2, 3. On means the link is enabled;
blinking means there is activity on the link; off means the link is disabled.