LightSand S-2500B, Инструкция по установке и эксплуатации

Страница: 47 / 86

Troubleshooting 4-9
Installing a Replacement SCSI Hard Drive
1.
If your replacement hard drive is installed in its carrier, go to step 4.
2.
If the replacement hard drive has no carrier, remove the faulty hard drive from its carrier:
3.
Remove the four screws that secure the drive to the carrier (see Figure 4-8 ).
4.
Remove the hard drive from the carrier.
Figure 4-8: Removing the SCSI Hard Drive From the Carrier
1.
Insert the replacement hard drive into the carrier and install four screws to secure the drive.
2.
Open the handle on the carrier and install the replacement hard drive and carrier into its slot
in the drive bay (see Figure 12).
3.
Close the handle until it engages the front panel, locking the drive in place.
4.
Replace the front bezel.
5.
Turn on the drive bay and reintegrate the drive.
1 Hard-drive carrier
2 Screws (4)
3 Hard drive