LightSand S-2500B, Инструкция по установке и эксплуатации

Страница: 31 / 86

System Configuration 3-3
4.
At the prompt (“gateway:>” or the gateway’s name, if it has already been configured),
enter the command to display the current data for the system:
gateway:>
show system info
Example response (note that the IP address is blank):
Name : gateway
Description : LightSand Gateway
IP Address :
Net Mask :
Type : S-2500B
Location : Milpitas
Contact : Management Group
State : active
Up Time : 0 day(s), 00:15:02
5.
Return to the top level, and enter the command to configure the system:
gateway:>
config sys
6.
Enter the correct IP address, and a net mask of “255.255.255.0”.
Example :
gateway/config/system#
ipaddr 192.168.1.185 255.255.255.0
7.
Enter the correct default gateway address:
Example :
gateway:>
config ip def-rtg-gateway 192.168.1.1
8.
Display the current system data to confirm the changes:
gateway:>
show system info
Example response:
Name : gateway
Description : LightSand Gateway
IP Address : 192.168.1.185
Net Mask : 255.255.255.0
Type :
S-2500B
Location : Milpitas
Contact : Management Group
State : active
Up Time : 0 day(s), 00:15:22