Rackmount:
(Hardwired Versions)
The standard rear service panel is provided with a series of 20mm. holes. The complete panel may be
removed to allow more space while connections are made.
Distribute the output cables via one or more cable restraining glands. It is essential that the live and neutral
pair for each output passes through the same gland. Secure the earth conductors to the earth block. Connect
the live and neutral conductors to output terminal blocks marked for each of the six channels.
Tighten the cable glands and ensure that the cables cannot be strained.
(Socket Versions)
Various international output socket types are available. Consult your dealer or the LightProcessor website for
further details. Outputs may be made via the output terminal blocks inside the rear of the Paradime as well as
via the front-panel sockets.
(Patchpack)
The Paradime Patchpack offers six direct non-dimming patches and twelve dimming patches to two 19-pin
output connectors. The Patchpack can be used stand-alone or built into larger touring systems. See page 3.
SERVICE PANEL OUTPUT OPTIONS
Additional service panels, either blank or pre-fitted and wired to multi-pole connectors, are available as
accessories for fitting to all models of the dimmer.
SERVICE PLATE TYPES
Connector Type
Connectors
Part Number
Blank
0
MPARADIM/B
19-pin Ceep/Socapex
1
PAR/S/SOC
19-pin Ceep/Socapex
2
PAR/D/SOC
16-pin Wieland/Harting
1
PAR/S/HART
16-pin Wieland/Harting
2
PAR/D/HART
Wieland Hotpatch
12
PAR/HOT
Wallmount:
(Hardwired Versions)
The left side-panel is provided with a series of 20mm. holes and there is an additional access plate on the top
face of the enclosure.
Distribute the output cables via one or more cable restraining glands. It is essential that the live and neutral
pair for each output passes through the same gland. Secure the earth conductors to the earth block. Connect
the live and neutral conductors to output terminal blocks marked for each of the six channels
(Socket Versions)
Variants are available with 12 x UK 15A socket, 6 x double Schuko socket (special order), 6 x double French
socket (special order). Outputs may be made via the output terminal blocks inside the rear of the Paradime as
well as via the front-panel sockets.
Tighten the cable glands and ensure that the cables cannot be strained.
LightProcessor Paradime, all variants, version 21, September 2003
Page V
19
5
10
12
13
14
16
17
18
19
5
12
14
16
17
18
19
5
10
12
13
14
16
17
18
CONNECTING THE OUTPUTS
