LIGHT MY BRICKS LEGO Joker Manor 70922 Lighting Kit, Руководство пользователя

Страница: 49 / 89

Bring the cable down the right side of the roof, then disconnect the following angled brick. Lay the cable in between studs, and push the cable down in
the corner to ensure you have enough cable slack before reconnecting the brick over the top. This will prevent the cable from snapping when you
reconnect the angled brick.
36.)
Use your LEGO Removal Tool to disconnect the top section of the roof as shown below then take a
White 15cm Bit Light
and with the LED
facing down and cable facing to the right, place it over the roof. Ensuring the cable is laid in between studs, reconnect the top section of the roof
as shown to secure the light and cable in place.
Bring the cable down the right side of the roof and secure it underneath the same angled brick as previous step.