LIGHT MY BRICKS LEGO Joker Manor 70922 Lighting Kit, Руководство пользователя

Страница: 67 / 89

51.)
Take a new
30cm Connecting Cable
and connect it to a spare port on the 12-Port Expansion Board on the bottom of the left side. Bring the
other end of the cable over to the right and thread it through the following technic pin. Pull the cable out from the other side.
Take 2x White Strip Lights and connect them together using a 5cm Connecting Cable . Take the other end of the 30cm Connecting Cable and
connect it to one of the Strip Lights. Take a 15cm Connecting Cable and connect it to the other end of the other White Strip Light. Thread the other
end of the 15cm Connecting Cable through the technic pin on the right, pulling it all the way out from the other side.
Using their adhesive backings, stick both strip lights to the green technic bricks in the below position. Loop the 5cm cable in between and push it up to
prevent it from dangling down. Turn the USB Power Bank ON to test the strip lights are working OK.