LIGHT MY BRICKS LEGO Joker Manor 70922 Lighting Kit, Руководство пользователя

Страница: 85 / 89

Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the
expansion board to verify where the fault lies (with the strip light or expansion board). To correct any issues with expansion board
ports, please view the section addressing expansion board issues on our
online troubleshooting guide.
65.) Using the LEGO Removal Tool, create a gap on the right side above the Joker slide trap room, just below the pink curved plate.
Thread the other end of the 30cm Connecting Cable through the gap in the front side of the set (between pink and purple pieces), leading to the inside
of the trap room. Pull the cable out from the inside and connect it to a Green Strip Light.