LIGHT MY BRICKS LEGO Joker Manor 70922 Lighting Kit, Руководство пользователя

Страница: 36 / 89

Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the
expansion board to verify where the fault lies (with the light or expansion board). To correct any issues with expansion board ports,
please view the section addressing expansion board issues on our
online troubleshooting guide.
26.) Disconnect the USB Power Cable, then twist/wind excess cables from the right side around each other neatly as shown below:
Turn the Joker Sign around, then twist/wind the two groups of cables into a neat bunch. Reconnect the Joker Sign to the front of the building, then
connect the other end of the 30cm Connecting Cable that we pulled up from below (step 6) to a spare port on the 12-port Expansion Board.
Take a new 30cm Connecting Cable and connect it to the remaining port on the 12-Port Expansion Board. Neatly place the expansion board down
the space in between the wall edge and the joker sign. Thread both 30cm Cables underneath and behind the bottom of the Joker Sign, then secure
30cm cable from below underneath the following angled brick.