Figure 3
Figure 5
STEP 1
(Fig.3)
Attach the operator head to the steel track.
Assembly the 2 “U” Hanging brackets with 6mm nuts supplied.
STEP 2
(Fig.3)
Place the steel track and operator head assembly centrally on the garage floor, with the open head
furthest away from the door. Lift the front of the track up to the door bracket. Insert the pivot pin and
secure it with the split pin supplied.
STEP 4
(Fig.3, Fig.5)
Connect the straight arm to the bent arm with the bolt.
Position and bolt the arms to the top edge of the door using the bolt supplied.
STEP 5
Lift the garage door until the shuttle locks into the drive chain/belt.
The operator can now be programmed.
STEP 3
(Fig.3, Fig.4)
Lift and support the operator head (with a ladder) so it is positioned centrally and
level. Fix the operator and track on the ceiling using the supplied support brackets.
WARNING:
Do not allow children around the door, operator or supporting ladder
serious injury and/or damage may result from failure to follow this warning.
Figure 4
Installation (Steel Track)
7
