1. Obstruction force adjustment
The minimum force display “1” and it can be adjusted upward. Display “5” means the maximum force.
2. Travel speed adjustment
“8” appears on the display indicates the 80% of the travel speed. Display “A” means the full speed
160mm/s or 200mm/s.
3. Reversal height adjustment
“0” appears on the display indicates the door will return to the top. Display “1~9” indicates the door will
rebound to the position of the whole travel. One tenth to Nine tenth of the whole travel etc.
4. Partial open/height
“0” appears on the display indicates close the partial open function. Display “1~9” to set the different
partial open position of the whole travel.
5. Transmitter button recognition function
“0” appears on the display indicates the buttons recognition function is closed. Display “1” indicates the
button recognition function is open.
6. Codes memory quantity
“A” appears on the display indicates the maximum code memory quantity (50pcs). Press UP/DOWN
button once, to increase or decrease quantity. The code memory quantity is set on 5pcs*N, N=1~9.
(The quantity is the multiple of 5).
7. Maintenance alarm
“b” appears on the display and led light flashes 10 times quickly means the garage door and motor
requie maintenance.
8. Automatic safety reverse
Automatic stop / automatic reverse are controlled by the internal circuit boards.
9. Soft start / Soft stop
Ramping speed up and down at the start and end of each cycle reduces stress on the door and
operator for a longer service life, and ensures quieter operation.
10. Auto-Close
Auto-Close ensures peace of mind and keeps your house secure by automatically closing the door
upon entering or exiting the garage.
11. Self learning open and close obstruction force
The amount of operator power for different stages of the door’s travel is learnt during setup and is
constantly re-profiled. The force measurement automatically adjustment in a suitable range.
12. Electronic limit, simple adjustment.
Limit setup can be adjusted from the control panel.
13. Extra terminal positions
Terminals available for accessories such as photo beams, additional receivers, wired or wireless wall
switches, caution lights & wicket door protection devices.
14. Energy saving - LED courtesy light
3 minutes LED light delay, switching on with each cycle to illuminate your darkened garage.
15. Battery backup (optional)
Operators can be supplied with optional battery backup, allowing limited use during power failure.
16. Self-Locking gear motors
Gear motor will self-lock when power is disengaged.
17. Manual release
The manual release system can be used to operate the door at any time.
PRODUCT DESCRIPTION & FEATURES
4
