LIFTPRO LPO0600, Инструкции по установке и Руководство пользователя

Страница: 15 / 28

5. Automatic Closing Condition Setting
a) Press and hold SET button until “1” appears on the display, next
press the UP button until “5” appears on the display to enter this
function setting then release the button.
b) Press the SET button again. The unit is now in automatic close
adjustment mode. You will see a figure “1” with a flashing dot on the
display.
c)
Press
UP / Down
button once to set the auto close mode.
You can choose “1” or “2”.
Figure “1”:
The door only can auto close while in the open limit position.
Figure “2”:
The door can auto close while the door is in any position.
d)
Press SET button to confirm the settings and it will return to
standby status automatically and display “ll”.
NOTES: 1. The closing mode is set on “1” as default. | 2. The door will automatically close when
stopped in its opening process, but can’t automatically close when it is stopped in its closing process.
6. LED OFF Delay Time Setting
a) Press and hold SET button until “1” appears on the display, next
press the UP button until “6” appears on the display to enter this
function setting then release the button.
b) Press the SET button again. The unit is now in LED off delay time
adjustment mode. You will see a figure “3” with a flashing dot on the
display.
c) Press UP / Down button once to set the LED off delay time (1~9).
d) Press UP button to increase the time, or DOWN button to
decrease the time.
The delay time is 1 minute*N, N=1~9.
The maximum delay time is 9 minutes.
e) Press SET button to confirm the settings and it will return to
standby status automatically and display “ll”.
NOTE: The LED off delay time is set on “3” as default.
SET UP
C ODE DOWN
SET UP
C ODE DOWN
SET UP
C ODE DOWN
SET UP
C ODE DOWN
increase
increase time
decrease
decrease time
SET UP
C ODE DOWN
SET UP
C ODE DOWN
SET UP
C ODE DOWN
SET UP
C ODE DOWN
15