LiftEquip TW160, Руководство по эксплуатации

Страница: 69 / 112

Operating manual Servicing and Maintenance
TW160 drive
TK Aufzugswerke
69
Version 08/2021
8.3 Lubrication
NOTICE
Bearing damage!
Damage to the bearings due to unsuitable lubricant

Use only the specified lubricant
8.3.1 Outside bearing
On delivery, the initial filling took place at the plant.
Rolling bearing grease F1 multipurpose grease can be obtained from
TK
Aufzugswerke
GmbH.
Part number Designation Amount of grease
60 300 27 900
AY multipurpose grease F1 cartridge
400 gr
Annually:
110 g re-lubrication
8.3.2
SAP 8.3-1
Gear
On delivery, the initial filling took place at the plant.
Synthetic gear oil SM1 can be obtained from
TK Aufzugswerke
GmbH.
Lubricant Replacement interval Motor position = filling
amount
Synthetic gear oil SM1
For the first time after 3 years
then every
6
years
17 litres
Table 8.3-1

Never mix different types of oil.

Do not let any oil seep through to the groundwater.

Dispose of old oil as well as cloths contaminated with oil and grease according
to
prevailing regional regulations.

Only use lubricants approved by
TK Aufzugswerke
GmbH
oil change
1. Before the oil change, run the gear until it reaches operating temperature (at
least 35°C).
2. Discharge the gear oil by removing the cap on the oil drain pipe and collect the
old oil in a container specifically designed for the purpose.