LiftEquip TW160, Руководство по эксплуатации

Страница: 66 / 112

Operating manual Commissioning
TW160 drive
TK Aufzugswerke
66
Version 08/2021
If the traction sheave and rope pulley are delivered separately, they are to be
mounted properly.
If the machine was dismantled due to weight, transport or space, removed parts are
to be reassembled to their original state and the mounting parts tightened with the
corresponding tightening torque.

Chapter
10.2.
7.2 Emergency operation
The TW160 is equipped for emergency operation with a handwinding wheel and a
brake release lever.
The brake release lever and pressure piece with pressure rod are mounted on the
brake shoes with notched impact pins. On the version with vertical motor position, the
brake release lever is additionally secured in the rest position with a retaining clip. The
brake lever is set in the operation position approx. 5 - 10° above the horizontal as
shown in the following illustration:
Operation position Rest position
Fig. 7.2-1
Emergency rescue of trapped persons
1. Open the brake by moving the brake release lever into the operation position
and actuate the lever against the pressure rod until the brake shoes are
released.
2. The handwinding wheel might also have to be moved to bring the elevator car
into the nearest landing.
3. Depending on the load, the elevator car can begin to move quickly after
opening the brake.
4. Immediately let go of the handwinding wheel and control the speed of the
elevator car by pressing the brake release lever with varying degrees of force.
5. Following the rescue operation, put the brake release lever back in the rest
position.
5°-10°