LiftEquip TW160, Руководство по эксплуатации

Страница: 80 / 112

Operating manual Servicing and Maintenance
TW160 drive
TK Aufzugswerke
80
Version 08/2021
8.10 Replacing the motor
Order a motor with clutch hub
8.10.1 Disassembly
1. Switch off the installation power supply.
2. Secure the car and counterweight before starting work.
3. Attach and secure the motor to the lifting gear.
4. Unplug the electrical connections.
5. Disconnect the lines from the motor (motor and magnetic clamp connection).
6. Remove the 4 axial screws for the flexible coupling and/or 4 nuts on the rigid
coupling. In the case of the flexible coupling, the elastomer part of the coupling
remains screw-connected to the brake disc.
7. In the case of the rigid coupling, the spacer washers remain between the clutch
hub and brake disc.Remove the nuts on the flange between the motor and gear
Structural shape IMB5 with flexible coupling.
 
chapter 10.4.
Structural shape IMB9 with rigid coupling

Carefully pull off the motor from the studs and place on the floor.
Both structural shapes
8. If the replacement motor was delivered without a handwinding wheel and
encoder or flywheel rim, remove these and use them for the new motor.

Installation instructions for encoder and handwinding wheel in

Cap.8.11