PRECAUTIONS BEFORE INSTALLATION
- 12 -
- 17 -
CORRECT OPERATION
When using the appliance for the first time or using it continuously, please follow
below rules!
Use an independent water source for the ice maker, and check regularly to prevent low
water, fluctuations, or blocked filters.
Do not store anything in the ice bin, and even worse to freeze or freeze any food in the
ice bin, to keep the ice shovel clean.
When closing the plastic door of the ice bin, open or close it gently, and do not hit the
door, and please also close the sliding door after taking the ice out.
The ice maker should be kept away from heat sources, strictly forbidden to use it in high
or low temperature environment. Away from direct sunlight to avoid affecting the heat
dissipation of the appliance.
Do not wash the ice maker surfaces with water directly, which may cause short circuit
and leakage.
If the ice maker is suspended for a long time after using it for a period of time, it should
be powered on for 4-6 hours every two months.
Avoid sun and rain
Good ventilation
Placement should be stable
Step 1: Hook up the drain hose
1.Pull out the water outlet plug
(Not
sewage outlet plug)
2.Insert the drain hose and install the
snap spring
to fix the drain hose.
Step 2: Adjust the valve and insert the water inlet hose
Installation steps of tap water inlet mode
1. Wrap the sealing tape
around the faucet
2.Insert the white water
inlet hose
1.Adjust the direction of the
valve to be perpendicular
to the water pipe (tap water
inlet mode)
2.Tighten the water pipe
with the connector
3.Fix the water inlet hose
with a blue buckle
Step 3: Hook up the water source
If the complimentary
connector does not
fit your faucet,
please buy it in your
local store.
