background image

IF HAVE STRANGE SMELL

If the ice has a strange taste.If the ice has a disgusting or mildewy odor in the machine, 
use the above steps to clean the inside of the machine.

SOUND DURING MACHINE OPERATION

The new ice maker may make unfamiliar sounds. Most sounds are normal. 
For example:
* Efficient compressors emit beating or sharp sounds.
* Water splashes from the evaporator to the tank.
* At the end of each cycle, you can hear the gurgling of refrigerant flow.
* The sound of air compressed by the condenser fan over the condenser.
* In the final deicing cycle, you may hear ice falling into the box.

- 22 - 

- 27 -

[email protected]

[email protected]

Water overfl

ow to the ice 

storage bin

Water pressure is too high

Reduce the water pressure or 

install a pressure reducing 

valve

Damaged float ball

Contact us for replacement

Email:[email protected]

The ice full lig

ht and the wa

ter shortage li

ght flash alter

nately

The ice cubes are stuck an

d can’t fall off from ice tray

Enter FORCED ICE-HARVEST 

program and restart after 5 

minutes

Forgot to select the water 

supply valve

Check the valve and reset 

the flap

CLEANING AND MAINTENANCE

MAINTENANCE

Please maintain the ice maker according to this manual to ensure its performance and 
service life.

1. Always keep the cold air inlet and hot air outlet at the lower end of the ice machine 
unobstructed. When you need to embed it into the cabinet, please reserve a little space 
around the ice machine.

2. The exterior can be cleaned with a neutral detergent solution, and then wiped clean 

with a soft cloth. If necessary, commercial stainless steel cleaners and polishing agents 

can be used.

3. If you install a filter element on the water system, you should check the filter element 
regularly and replace it.

4. When cleaning the inside of the ice machine, you can wash the ice bin directly with 
water. But don't wash other places, otherwise the circuit part of the ice machine may be 
damaged. Use an cloth to clean it or let it self clean.

5. You should maintain the condenser of the ice machine every 3 months. Use a soft 
brush or a vacuum cleaner with a brush to wipe the condenser fins along the direction of 
the fins to ensure the performance of the fins.

6. If you will not use it for a long time, please unplug it and empty the residual water in 

the water tank and water pipe of the ice machine.

Содержание DBJ-32A





































Отзывы: