- 16 -
- 21 -
WARNING: PLEASE ONLY USE DRINKING WATER.
The pipe connections on the unit
are marked. In case of conflict,
the identification on the unit shall
prevail.
Water tank drain pipe
Water tank inlet pipe
F"d1Ñ
Â"d1Ñ
Water Inlet Supply
Bucket Water Supply
Tap Water Supply
Valve
Inlet Pipe
Please adjust the valve direction
correspondingly BEFORE use
Remove the Water Inlet Pipe
1. Remove the Blue Buckle
2. Press the white part as the picture
and pull out the Inlet Pipe
TROUBLESHOOTING
Fault indication:
Ice full indicator flashes quickly:
The ambient temperature detector is faulty, try to
restart ice maker. If unable to solve, please contact the seller.
Ice full indicator and water shortage indicator flash alternately:
the open and
closed signals of the ice full switch cannot be detected for 3 consecutive times, the
machine stops working and reports a mechanical failure.
FAULT SELF-DIAGNOSIS
1. Water pump —— You can directly observe whether the water flows down from the top
of the ice tray. If not, the water pump may dameged.
2. Ice making —— After the ice-making last running for 10 minutes, the water in the
insede water tank will be cold. You can touch the ice tray or the running water to feel the
water temperature. If it is not cold, the compressor may be damaged.
3. If you use tap water inlet mode to make ice and find that the water overflows from the
inside water tank. Please check whether the water pressure in your house exceeds the
specified range. If it is confirmed that the problem is water pressure, you need a pressure
reducing valve to reduce the water pressure.
