www.LifeIonizers.com/Support
23
75
9000/9100/9200
Operation Warnings / Error Messages
If the following error messages appear on the LCD screen,
be sure to contact our technical support at 866.321.3116.
CHECK:
In case the water inlet volume is less than 1.0 liter per minute
or over than 5.0 liters per minute, the unit will not work for electrolysis
operating in order to protect itself. Therefore, water pressure of the
natural water should be adjusted accordingly. (Error code : E1)
E0 : Sliding door open
E1 : Water flow from faucet is either too high or too low
E2 : Filter memory reading problem
E3 : Filter life screen display problem
E4 : Filter serial number problem
E5 : Overload and temperature problem
After checking the ERROR CODE, please contact technical support.
•
Improper use may cause structural damage to the unit or physical injury.
•
Do not make any adjustments to the unit.
•
Do not place anything on the unit.
•
Disassemble the alkaline water outlet pipe (power set hose) before
picking up the unit. Failure to do so may cause the hose to break
which will result in water leakage.
•
Water drain outlet should not be closed.
•
Be sure to check the electric power 110V/220V prior to use.
•
In case of malfunction, contact Life Ionizers Technical Support at
760.585.1692.
•
Do not use hot water as the ionizer is meant for cool water only.
•
Unplug the electric power when not in use for a long time (over a week).
•
Do not use well water, underground water, polluted water or
metallic water.
•
Do not use water with a temperature of over 35� celcius/ 95� fahrenheit
as it may cause damage or short filter life (Room temperature is best).
•
Do not use pre-inonized water.
•
Do not clean the unit by alcohol.
•
Only use certified replacement filters.
•
Be careful not to shake or drop the unit.
