www.LifeIonizers.com/Support
22
75
9000/9100/9200
Amperage/Volume Adjustments/Filter Reset
AMPERAGE ADJUSTMENT
•
Turn machine on
•
Hold down the
"Mode"
button for 5 seconds
•
Scoll through menu by pressing
"Mode"
until the Alkali symbol
appears and flashes
•
Press the
"Alkali"
symbol to select which Alkali level you wish to adjust
•
Once you have selected the Alkali level, press the
""
symbol to increase amperage or the
"Washing-"
symbol to decrease
amperage (Note: The unit comes factory set at 50 and can be increased
to a maximum value of 100 or decreased to a minimum value of 0 in 1
point increments)
•
Once you have completed adjusting your amperage press
"Set up"
to save your settings.
VOLUME ADJUSTMENT
•
Turn machine on
•
Hold down the
"Mode"
button for 5 seconds
•
The first selection on the menu is the volume adjustment mode easyily
recognizable by the word
“voice”
flashing on the bottom of the screen
•
To increase volume, press
""
; to decrease volume press
"Wash-
ing-"
(Note: The unit comes from the factory with the
volume set to its maxiumum setting)
•
Once you have completed adjusting your volume press
"Set up"
to
save your settings
FILTER RESET
•
Turn machine on
•
Press and hold the
"Mode"
button for 5 seconds
•
Scoll through menu by pressing
"Mode"
until you reach desired filter
located on top of LED screen
•
Press the
""
symbol to reset the filter count (Note: when resetting
filter 1, filter count will display 400, and resetting filter 2 count will display
800. Once they are reset, the number will decrease as filters are used. The
filter is due for replacement when the count reaches 0)
•
Press
"Set up"
to exit menu screen