WARNING: Keep the area 6.5 ft. (2 m) by 3 ft. (0.9 m) behind the treadmill clear of any obstructions, including
walls, furniture, and other equipment. Contact Customer Support Services for an optional longer power cord if
necessary.
WARNING: Be sure the emergency stop lanyard is clipped to the user and in proper position on the treadmill
before beginning any workout.
WARNING: The belt centering adjustment must be performed if the belt is not between the marks indicating the
maximum allowed lateral positions. Refer to Treadmill Assembly Instructions.
• The product should never be left unattended when plugged in. Disconnect from the electrical outlet when not in use,
and before putting on or taking off parts. To disconnect, turn power OFF at the ON/OFF switch, then remove plug
from electrical outlet.
• Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a
handle.
• Handrails may be held to enhance stability as needed, but are not for continuous use.
• Never mount or dismount the treadmill while the running belt is moving. Use the handrails whenever additional
stability is required. In case of an emergency, such as tripping, grasp the handrails, and place the feet on the side
platforms.
• Never walk or jog backwards on the treadmill.
• Do not use this product in areas where aerosol spray products are being used or where oxygen is being administered.
Such substances create the danger of combustion and explosion.
• In conformity with the European Union Machinery Directive 2006/42/EC, this equipment unloaded runs at sound
pressure levels below 70 dB (A) at the average operating speed of 12 km/hr. Noise emission under load is higher
than without load.
Arc Trainer
WARNING: Ensure that there is at least 1 ft. (0.3 m) of clearance in front of the Arc Trainer and at least 2 ft. (0.6m)
on the side.
WARNING: The Arc Trainer is not equipped with a free-wheeling feature. Therefore, the product cannot be
stopped immediately.
• Do not stand or sit on the rear plastic covers of the Arc Trainer.
• The individual human power required to perform an exercise may be different than the mechanical power displayed
on the Arc Trainer.
• Use caution when mounting or dismounting the Arc Trainer. Before mounting, use the moving arms to bring the pedal
nearest to you to the lowest position. Use the stationary handlebars whenever additional stability is required. While
exercising, hold onto the moving arms.
• Never face backward while using the Arc Trainer.
Cross-Trainer
WARNING: Ensure that there is at least 1 ft. (0.3 m) of clearance in front of the Cross-Trainer and at least 2 ft. (0.6m)
on the side.
WARNING: The Cross-Trainer is not equipped with a free-wheeling feature. Therefore, the product cannot be
stopped immediately.
• Do not stand or sit on the rear plastic covers of the Cross-Trainer.
• Do not stand on center tube of the Cross-Trainer.
• The individual human power required to perform an exercise may be different than the mechanical power displayed
on the Cross-Trainer.
• Use caution when mounting or dismounting the Cross-Trainer. Before mounting, use the moving arms to bring the
pedal nearest to you to the lowest position. Use the stationary handlebars whenever additional stability is required.
While exercising, hold onto the moving arms.
• Never face backward while using the Cross-Trainer.
Lifecycle Exercise Bikes
WARNING: Allow a distance of 16 in. (41 cm) between the widest part of the bike and other objects on either
side. Provide at least 3 ft. (0.9 m) between the front or rear of the bike to any other objects and 2 ft. (0.6 m) in the
direction the equipment is accessed from.
• Do not stand or sit on plastic shrouds.
• Use caution when mounting or dismounting the bike. Use the stationary handlebar whenever additional stability is
required.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Page 9 of 44