Liebert DM Series, Руководство пользователя

Страница: 76 / 78

Appendix 6 Parameter Setting Table 69
Liebert_DM 16kW Air Conditioner User Manual
Menu Parameter Default Setting range
Alarm Menu
Alarm Control
OEM HUM Error On On, Event, Off
HUM Low Water On On, Event, Off
Fan Hours Exceeded On On, Event, Off
C1 Hours Exceeded On On, Event, Off
C2 Hours Exceeded On On, Event, Off
Heat1 Hours Exceeded On On, Event, Off
Heat2 Hours Exceeded On On, Event, Off
HUM Hours Exceeded On On, Event, Off
Power Loss On On, Event, Off
Power High On On, Event, Off
Power Low On On, Event, Off
Freq Error On On, Event, Off
Phase Loss On On, Event, Off
Phase Reverse On On, Event, Off
Customer
Input
Alarm
Control
On On, Event, Off
Normal
Status
Open Open, Closed
Alarm Setpoint
High TEMP alarm 35°C 30
℃
~ 45°C
Low TEMP alarm 15°C 5°C ~ 20°C
High HUM alarm 65%RH 65%RH ~ 90%RH
Low HUM alarm 35%RH 10%RH ~ 35%RH
Set Point Control
Return Air TEMP 24°C 15°C ~ 35°C
TEMP Sensitivity 3°C 1°C ~ 10°C
Return Air HUM 50%RH 20%RH ~ 80%RH
HUM Sensitivity 5%RH 1%RH ~ 10%RH
System
Status
Input Status
NTC 0, NTC
1, NTC 2,
NTC 3
Alarm Enable Enable Enable, Disable
High TEMP Alarm 35°C 30°C ~ 45°C
Low TEMP Alarm 15°C 5°C ~ 20°C
TEMP Calibration 0°C -10°C ~ 10°C
System
Menu
TEMP Control
DeadBand 0°C 1°C ~ 5°C
Control Mode Proportion Proportion, PID
Sample Time 25s 1s ~ 300s
I Action 90s 0 ~ 9000s
D Action 5s 0 ~ 9000s
Proportional MAX 100% 0 ~ 200%
Integral MAX 100% 0 ~ 200%
Differential MAX 100% 0 ~ 200%
PID change MAX 20% 0 ~ 200%
HUM Control
Flush Rate 150% 100% ~ 500%
Prefill Time 30s 10s ~ 300s
Run Interval 15h 5h ~ 25h
HUM Time 8/10min (IFM/IFL) 1min ~ 15min
Fill Time 4/7min (IFM/IFL) 1min ~ 15min
Flush Time 10s 5s ~ 30s
DeadBand 0%RH 1%RH ~ 10%RH
MAX Current 9A 6A, 9A, 12A
Heating Disable HUM Yes Yes, No
△
T Disable DeHUM -3°C -10°C ~-0.5°C
System
Config
Config Menu
Cool Type Air Air, Water, CW
Comp QTY 2 0 ~ 2
Heat Type EH EH
Heat QTY 1 1 ~ 2
Fan QTY 3 1 ~ 3
HUM Type IRL IRM, IRL, CAREL, CM+