LGMG SR1018D, Руководство по эксплуатации, Страница: 94 / 109

Elevating Work Platform Operation Manual
87
button. Press and hold the platform
lowering button.
Result: The platform shall lower.
5) Turn the key switch to the Platform Control
Station and restart the engine.
8.5 Platform Control Station
Test
Emergency Shutdown Test
1) Push the red emergency shutdown button
on the platform to the "Off" position.
Result: The engine shall be turned off and all
functions shall be disabled.
2) Pull the red emergency shutdown button
out to the "On" position.
Result: The indicator will be green.
Horn Test
1) Press the horn button.
2) Result: The horn will sound.
Lifting/Lowering Functions and Function
Enabling Test
1) Start the engine.
2) Press the enable switch and push the
lifting/lowering control handle forward.
Result: The platform shall not lift.
3) Press the enabling button with lifting
functions.
4) Press the enable switch and push the
lifting/lowering control handle forward.
Result: The platform shall lift.
5) Press the enabling button with lifting
functions.
6) Press the enable switch and push the
lifting/lowering control handle backward.
Result: The platform shall lower. When the
platform lowers, the lowering alarm shall sound.
Steering Test
△
!
Notice: When performing steering
and driving function tests, stand in the
middle of the platform and face the
steering end of the machine.
1) Press the driving function button.
2) Press and hold the enabling switch on the
control handle.
3) Press the thumb rocker switch at the top of
the control handle in the direction indicated
by the blue triangle on the control panel.
Result: The steering wheels shall turn in the
direction indicated by the blue triangle on the
control panel.
4) Press the thumb rocker switch in the
direction indicated by the yellow triangle on
the control panel.
Result: The steering wheel shall turn in the
direction indicated by the yellow triangle on the
control panel.
Drive and Brake Functions Test
1) Press the driving function button.
2) Press and hold the enabling switch on the
control handle.
3) Move the control handle slowly until the
machine starts to move in the direction
indicated by the blue arrow on the control
panel and return the handle to the center
position.
Result: The machine shall move in the direction
indicated by the blue arrow on the control panel
and then stop suddenly.
4) Press and hold the enabling switch on the
control handle.
5) Move the control handle slowly until the
machine starts to move in the direction
indicated by the yellow arrow on the control
panel and return the handle to the center
position.
Result: The machine shall move in the direction
indicated by the yellow arrow on the control
panel and then stop suddenly.
△
!
Notice: On any slope the machine
can climb, the brakes must be able to
hold the machine stationary.