LGMG SR1018D, Руководство по эксплуатации, Страница: 68 / 109

Elevating Work Platform Operation Manual
61
8 Reserve
9 Machine inclination button with indicator: Please
operate it at a low speed during inclination.
Press this button to perform operation at
a low speed during inclination.
10 Green power lamp/red error power lamp When the red emergency shutdown
button is pulled out to On position, the
green power lamp will be on. If the red
error indicator is on, press and pull out
the red emergency shutdown button to
set the system. If the lamp is still red,
mark the machine and stop using it.
11 Red emergency shutdown button Push the red emergency shutdown button
inward to Off position to stop all functions
and shut down the engine. Pull the red
emergency shutdown button out to On
position to operate the machine.
12 Enabling switch Press the enabling switch to start up the
drive function.
13 Proportional control handle of drive function Press the enable switch and move the
control handle in the direction indicated
by the blue arrow on control panel, and
then the machine will move in the
direction indicated by the blue arrow.
Press the enable switch and move the
control handle in the direction indicated
by the yellow arrow on control panel, and
then the machine will move in the
direction indicated by the yellow arrow.
14 Thumb rocker switch for turning function Press the enable switch and press the left
side of the thumb rocker, then the
machine will turn to the left.
Press the enable switch and press the
right side of the thumb rocker, then the
machine will turn to the right.
15 Wrist pad
16 Enabling button of lifting function with indicator Press this button to activate the lifting
function.
17 Proportional switch for rising and falling of outrigger
and platform (Hall switch)
When the automatic leveling button
indicator is on, push the switch in the
direction indicated by the yellow arrow,
and then the outrigger will extend; push
the switch in the direction indicated by the
blue arrow, and then the outrigger will
retract.
When the enabling button indicator of
single outrigger is on, push the switch in
the direction indicated by the yellow
arrow, and then the outrigger will extend;
push the switch in the direction indicated
by the blue arrow, and then the outrigger
will retract.
When the enabling button indicator with
lifting function is on, push the switch
forward, and then the platform will rise;