LGMG SR1018D, Руководство по эксплуатации

Страница: 14 / 109

Elevating Work Platform Operation Manual
7
10) Limit travel speed according to ground
conditions, traffic, road grade, personnel
position, or any other possible bump
factors.
11) It is recommended the operator wear a
qualified safety helmet when operating the
machine.
1.12 Hazard of Component
Damage
1) Do not use any battery or charger greater
than 12 V to start up the engine.
2) Do not use the machine as a ground for
welding.
3) Do not use the machine in a place where
there may be a magnetic field.
1.13 Hazard of Explosion and
Fire
1) Do not use the machine in a hazardous
place where there may be inflammable or
explosive gas or particles.
2) Do not start the engine if liquefied
petroleum gas (LPG), gasoline, diesel or
other explosive substances are smelled or
perceived.
3) Do not refuel the machine when the engine
is running.
4) Refuel the machine or charge the battery
only in open and well-ventilated places far
away from sparks, open flames, burning
cigarettes, etc.
1.14 Machine Damage
Hazards
1) Do not use a damaged or malfunctioning
machine.
2) Make a complete operational and function
check before each shift. Attach a tag on a
damaged
or malfunctioning machine
immediately and stop all operation.
3) Be sure to perform all maintenance and
operation according to the instructions in
this manual.
4) Be sure to keep all labels and decals at the
appropriate locations. Replace any that are
not legible.
5) Be sure to keep this manual in the manual
box of the platform.
1.15 Personal Injury Hazards
1) Do not operate the machine if it is leaking
hydraulic oil. Leaking hydraulic oil under
pressure can pierce or burn skin.
2) Always operate the machine in a
well-ventilated place to avoid poisoning of
carbon monoxide.
3) Severe injury may result if any component
below the cover is touched by mistake.
Only trained technicians can perform
maintenance to the components under the
cover. The operator shall only perform
maintenance before the pre-operation
inspection.
Be sure to keep all
compartments closed and locked during
operation of the machine.
1.16 Battery Safety
Combustion Hazards
1) The battery contains acid. Wear protective
clothing and safety goggles when
performing maintenance on the battery.
2) Take measures to prevent acid from
overflowing out of the battery or being
touched. Neutralize the overflowed acid
material from the battery with soda and
water.
Explosion Hazard
1) Keep the battery away from any sparks or
open flames. The battery can release an
explosive gas.
2) Do not touch the battery terminal or the
cables with any tool that may cause a