LGMG S0507SDTCE10, Руководство по эксплуатации и обслуживанию

Страница: 60 / 79

Operation and Maintenance Manual of Aerial Work Platform
3) Tick on the corresponding position after each inspection.
4) Learn how to make the inspection step by step.
5) If the inspection result “N” is made, mark and stop the machine work until it is repaired and
checked again. Tick on the position “R” after the repair.
Legend description
Y=Accepted
N=Rejected
R=Repaired
Check list A Y N R
A-1 Inspection of manual and label
A-2 Pre-operation inspection
A-3 Function test
40 hours later
A-4 30-day maintenance
Check list B Y N R
B-1 Battery
B-2 Wire
B-3 Tyre and rim
B-4 Emergency stop
B-5 Key switch
B-6 Horn
B-7 Drive brake
B-8 Driving speed in the folding status
B-9 Driving speed in the lifting status
B-10 Slow-speed driving
B-11 Hydraulic oil analysis
B-12 Exhaust System
B-13 Chassis tray component
B-14 Test of lower limit and hollow protector
switch
B-15 Test of upper limit switch
Check list C Y N R
C-1 Platform overload system
C-2 Replacement of ventilation pipe of hydraulic
oil tank
Check list D Y N R
D-1 Inspection for wear-resistance slide block of
scissor
D-2 Replacement of hydraulic oil filter core
Checklist E Y N R
E-1 Hydraulic oil
12.9 Steps of checklist A
56