LGMG S0507SDTCE10, Руководство по эксплуатации и обслуживанию

Страница: 47 / 79

Operation and Maintenance Manual of Aerial Work Platform
platform shall lower to the height of 2m and then stop lowering.
6) Push down and hold the platform lifting and lowering switch again.
Result: the platform shall descend to the lowest position. When the platform descends, the lowering
alarm shall ring.
9.7 Test of auxiliary lowering function
1) Push up the platform lifting and lowering switch to lift the platform by about 60cm.
2) Pull out the emergency lowering control button at the right front part of the machine.
Result: the platform shall descend. The lowering alarm shall not ring.
3) Switch the key switch to the platform controller.
9.8 Test on platform controller
1) Push the red ground emergency stop button to the “OFF” position.
Result: all functions shall not be enabled.
2) Place the red emergency stop button to the “OFF” position.
Result: the LED data diagnosis device indicator lamp shall light up.
9.9 Test of horn
1) Press the horn button.
2) Result: the horn shall ring.
9.10 Test of lifting/lowering function and initializing of function
1) Do not press the enable key on the control handle.
2) Slowly move the control handle as per the blue arrows and then move it as per the yellow arrows.
Result: all functions shall not be enabled.
3) Press the lifting function selector button.
4) Press the enable key on the control handle.
5) Slowly move the control handle as per the blue arrows.
Result: the platform shall rise. The hollow protector shall be stretched.
6) Release the platform control handle
Result: the platform shall stop rising.
7) Press the enable key. Slowly move the control handle as per the yellow arrows.
Result: the platform shall descend. When the platform descends, the lowering alarm shall ring.
9.11 Turning test
△
! Notice: please stand on the platform and face to the machine turning port when testing the turning and
driving function.
1) Press the drive function selector button and then the indicator lamp lights up.
2) Press the enable key on the control handle.
3) Press the rocker switch on top of control handle according to the direction indicated by leftward
arrows on the control panel.
Result: the steering wheel shall move as per the direction indicated by the leftward arrows on drive
chassis.
9.12 Test of driving and braking function
1) Press the enable key on the control handle.
2) Slowly move the control handle as per the directions of the up arrows on the control panel until the
43