80
206-4350
(Continued from previous page)
• When you have entered all the beacon identification data, select the the
Wheel (
OK
) button button at the bottom of the menu, and then press the
Wheel (
OK
) button on the Installer Remote.
• At the prompt for broadcast confirmation, select either
Yes
to broadcast
the Beacon or
No
if you do not want to broadcast the Beacon.
5. If desired, you can specify a name for this TV so that it is easy to identify
and differentiate from other TVs for which sharing has been/will be enabled.
Note:
By default, the TV name is the TV’s serial model name.
However, if a room number is specified in the EZ-Manager Wizard or in the
General Menu / Room Info screen, the TV name is changed to the room
number.
To edit the TV name, use the Up/Down arrow keys to select the
TV Name
field, and then press the Wheel (
OK
) button. You can then use the number
keys on the Installer Remote to directenter a numeric TV name, or you can
use the arrow keys to select the appropriate alphanumeric character(s) from
the pop-up virtual keyboard at the bottom of the screen. When you are
done, select
Enter
from the virtual keyboard, and then press the Wheel (
OK
)
button on the Installer Remote.
6. Once all fields are completed as required, use the arrow keys on the Installer
Remote to return to the IP Environment Menu, as necessary, or press
BACK/
EXIT
to exit the IP Environment Menu.
Note:
While Smart Share, Screen Share, Media Renderer, DIAL, and Beacon
settings are clonable, SoftAP settings, as well as the TV name cannot be cloned.
IP Environment Setup (Cont.)
