EXTERNAL E
QUIPMENT SETUP
HDMI/DVI - DTV mode
Component mode
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 480
31.469
31.5
59.94
60
720 x 576
31.25
50
1280 x 720
37.500
50
1280 x 720
44.96
45
59.94
60
1920 x 1080
33.72
33.75
59.94
60
1920 x 1080
28.125
50.00
1920 x 1080
27
24
1920 x 1080
33.75
30.00
1920 x 1080
56.250
50
1920 x 1080
67.43
67.5
59.94
60
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720 x 480
15.73
59.94
720 x 480
15.75
60.00
720 x 576
15.625
50.00
720 x 480
31.47
59.94
720 x 480
31.50
60.00
720 x 576
31.25
50.00
1280 x 720
44.96
59.94
1280 x 720
45.00
60.00
1280 x 720
37.50
50.00
1920 x 1080
33.72
59.94
1920 x 1080
33.75
60.00
1920 x 1080
28.125
50.00
1920 x 1080
56.25
50
1920 x 1080
67.432
59.94
1920 x 1080
67.5
60.00
NOTE
Ź
Avoid keeping a fixed image on the set’s screen
for prolonged periods of time. The fixed image
may become permanently imprinted on the
screen use a screen saver when possible.
Ź
There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graph-
ic card can not be changed, change the PC
graphic card or consult the manufacturer of the
PC graphic card.
Ź
The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
Ź
We recommend using 1920 x 1080 @ 60 Hz
(Except for M2080DF)
, 1600 x 900 @ 60 Hz
(Only M2080DF)
for the PC mode, this should
provide the best picture quality.
Ź
Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the SET or
the signal cable from the HDMI output port of the
PC to the HDMI/DVI IN port on the SET.
Ź
Connect the audio cable from the PC to the Audio
input on the SET. (Audio cables are not included
with the TV).
Ź
If using a sound card, adjust PC sound as required.
Ź
If the graphic card on the PC does not output
analogue and digital RGB simultaneously, connect
only one of either RGB or HDMI/DVI IN to display
the PC output on the SET.
Ź
If the graphic card on the PC does output ana-
logue and digital RGB simultaneously, set the SET
to either RGB or HDMI. (The other mode is set to
Plug and Play automatically by the SET.)
Ź
DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
Ź
If you use too long an RGB-PC cable that is too
long, there may be interference on the screen. We
recommend using under 5m of cable. This pro-
vides the best picture quality.
