PICTURE CONTROL
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is
still not correct, your set is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
1. Using OSD
ܙ
1
2
3
4
5
0(18
Run
Auto Config.
Select
Screen.
Select
Auto Config.
Select
Yes.
Select
PICTURE.
• Press the
MENU
or
EXIT
button to close the menu window.
• Press the
BACK
button to move to the previous menu screen.
Resolution
Auto Config.
Position
Size
Phase
Reset
SCREEN
To Set
Yes
No
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB (PC), you can adjust the
Posi tion, Size or Phase.
2. Using Auto Config. (Remocon)
<M2080DF>
<M2280DF, M2380DF >
This function is available for RGB signals only.
<Others Resolution>
<Others Resolution>
<1600 x 900 Resolution>
<1920 x 1080 Resolution>
Press
Auto Config.
Press
Auto Config.
1
1
Auto in progress
For optimal display
change resolution 1600 x 900
Auto in progress
For optimal display
change resolution 1920 x 1080
Auto in progress
Auto in progress
!
!
Move
Enter
PICTURE
•
Contrast
100
•
Brightness
50
•
Sharpness
50
• Colour
50
•
Tint
0
• Advanced Control
• Picture Reset
Screen(RGB-)PC
Screen(RGB-)PC
(QWHU
(QWHU
(QWHU
(QWHU
Move
Prev.
