APPENDIX
PROGRAMMING THE REMOTE CONTROL
PROGRAMMING CODE
The remote is a multi-brand or universal remote. It can be programmed to operate most remote-con-
trollable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Test your remote control.
To find out whether your remote control can operate the component without programming, turn on
the component such as a VCR and press the corresponding mode button (such as a DVD or VCR)
on the remote control, while pointing at the component. Test the POWER and CH
ᭈᭉ
buttons to
see if the component responds properly. If not, the remote requires programming to operate the
device.
Turn on the component to be programmed, then press the corresponding mode button (such as a
DVD or VCR) on the remote control. The remote control button of desired device is lighted.
Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed
for the code.
Enter a code number using the number buttons on the remote control. Programming code num-
bers for the corresponding component can be found on the following pages. Again, if the code is
correct, the device will turn off.
Press the MENU button to store the code.
Test the remote control functions to see if the component responds properly. If not, repeat from step 2.
Cleaning the Screen
DVD
1
2
3
4
5
6
%UDQG
&RGHV
%UDQG
&RGHV
%UDQG
&RGHV
$3(;',*,7$/
'(121
*(
+$50$1.$5'21
-9&
/*
0$*1$92;
0$5$17=
0,768%,6+,
1$'
21.<2
3$1$621,&
3+,/,36
3,21((5
352&(('
3526&$1
5&$
6$0681*
621<
7+203621
726+,%$
<$0$+$
=(1,7+
