Note:
•
You cannot change the video resolution at the HDMI IN mode.
Change the video resolution of the connected component.
•
You cannot operate SIMPLINK function at the HDMI IN mode.
•
The setting of the sound mode is not available when Dolby Digital
Plus, Dolby TrueHD and DTS-HD are played at HDMI IN mode.
•
If the video output signal is abnormal when your personal computer is
connected to HDMI IN jack, change the resolution of your personal
computer to 576p, 720p, 1080i or 1080p.
1 Connect the optical output jack of your
component into the OPTICAL IN jack on
the back of the wireless front right speaker. -
2 Turn the power on:
1
1
3 Select the [OPTICAL] option:
RADIO (INPUT)
4 Turn down the volume:
VOL (+/-)
5 Turn your component on:
-
6 Adjust the volume:
VOL (+/-)
You can enjoy the sound of your component with the digital
optical output jack from the speakers of the system.
ON REMOTE
Using DIGITAL AUDIO IN jacks
To the digital optical output jack of your component
1 Connect the HDMI OUT jack of your
component into the HDMI IN jack on the
back of the wireless front right speaker.
-
2 Turn the power on:
1
1
3 Select the [HDMI IN] option:
RADIO (INPUT)
4 Turn down the volume of this unit:
VOL (+/-)
5 Turn your component on:
-
6 Adjust the volume of this unit:
VOL (+/-)
You can enjoy the pictures and sound of your component with the HDMI
OUT jack.
ON REMOTE
Using HDMI IN jack
To the HDMI OUT jack of your
component (set-top box, digital satellite
receiver, video game machine, etc.)
46
HB994PK-F.AIRNDLK_ENG_9793 7/14/10 7:45 PM Page 46