- 153 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
12. AUTO CALIBRATION
LGE Internal Use Only
1. Connect as Fig 10-1(RS232 serial cable is connected between COM port of PC and MON port of TEST
JIG, in general)
2. Set the Power Supply 4.0V
3. Set the 3
rd
, 4
th
of DIP SW ON state always
4. Press the Phone power key, if the Remote ON is used, 1
st
ON state
12.4 Procedure
1. Connect as Fig 10-1(RS232 serial cable is connected between COM port of PC and
MON port of TEST JIG, in general.)
2. Run
HK_37.exe
to start calibration.
3. From the Calibration SETTING->Logic Operation menu