LG 65LX570H Скачать руководство пользователя страница 47

Страница: 47 / 71

206-4278

Pro:Centric Setup

Pro:Centric options enable you to configure the TV with the

appropriate settings to connect to the Pro:Centric server. Use the

Up/Down arrow keys on the Installer Remote to navigate between

fields.

1. With the IP Environment Menu on display, use the arrow keys

on the Installer Remote to select

Pro:Centric

. Then, press

Note:

Options that are initially grayed out/inaccessible in the

Pro:Centric Menu are dependent upon other settings in the

display. For example, if “IP” is selected in the Media Type field,

the Server IP and Port Number fields become accessible.

2. Refer to the appropriate subsection(s) below to configure the

TV’s Pro:Centric settings to match those of the Pro:Centric

server.
While the Pro:Centric application (Mode) itself is an additional

feature, the appropriate Pro:Centric server configuration must

be completed to enable TV E-Z Installation (splash screen,

configuration, and software/firmware) data downloads and, if

configured, the Pro:Centric application download.

Note:

For those fields that permit direct entry of numerical

values (for example, Server IP, Port Number, Data Channel,

etc.), once you key in the maximum number of digits allowed in

the highlighted field, the next available field will be highlighted.

PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies.

RF Configuration

a) In the Media Type

field,

use the Left/Right arrow keys to select

Note:

If the Media Type has already been set in the EZ-Manager

Wizard, the specified value will be reflected in this field.

In the Data Channel field, either key in or use the Left/Right arrow keys

to select the RF channel number that will be used by the Pro:Centric

server as its data channel. The Data Channel value can be set from 0

(disabled) to 135.

For TVs in Pass-through Mode or FTG Mode via CPU, if this item

is left at its default value (255), the TV’s Data Channel Auto Search

feature will be enabled. See Installer Menu item 119 DATA CHANNEL

description on page 31 for further information.

Note:

If the Data Channel has already been set in the Installer Menu

(Installer Menu item 119) or in the EZ-Manager Wizard, the specified

channel will appear in this field. If you change the Data Channel in this

menu, Installer Menu item 119 will now show the value you entered

here.

(Continued on next page)

IP Environment Setup (Cont.)

IP Environment

Move

IP Environment

Move

• Network Connection
• Network Status

• Pro:Centric

• MAC Address: CC:2D:8C:87:8B:70

Configuration Only

Mode
Media Type

Server IP
Port Number

Data Channel
Update Event

Update Time

255

Off

12 AM

Содержание 65LX570H








































































Результаты поиска

Содержание 65LX570H

Отзывы:

Похожие инструкции для 65LX570H

Бренды по названию

Популярные бренды

LG 65LX570H, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 65LX570H

Отзывы:

Похожие инструкции для 65LX570H

Бренды по названию

Популярные бренды