16
206-4278
EZ-Manager Wizard (Cont.)
(Continued from previous page)
Note:
If, after completing the search, the TV is unable to find the
Pro:Centric data channel (while the Searching for Pro:Centric
Server screen is on display), the wizard will stop and show a
Diagnostics screen that enables you to manually return to the
previous screen (to reinitiate the configuration) or exit the wizard.
When the Pro:Centric Configuration is complete, an EZ-Manager
Configuration Complete screen is displayed, and after 10
seconds, the wizard exits, and the TV turns OFF.
Note:
With the EZ-Manager Configuration Complete screen on
display, you can also manually turn off or reboot the TV. If
desired, select
Turn Off
or
Reboot
, respectively, and then press
OK
on the Installer Remote.
Manual Pro:Centric Configuration
1. With the Searching for Pro:Centric Server screen on display,
use the arrow keys on the Installer Remote to select/highlight
Manual Pro:Centric
at the bottom right of the screen, and
then press
OK
.
In the Pro:Centric Manual Configuration screen (see examples
at right below and on following page), you will be able to
configure the appropriate Pro:Centric settings in the TV.
Use
the Up/Down arrow keys on the Installer Remote to navigate
between fields.
2.
In the Pro:Centric Mode field, use the Left/Right arrow keys to
select the appropriate Pro:Centric Application Mode—FLASH,
GEM, or Configuration Only.
Note:
For remote management only, select
Configuration
Only
. The TV will search for TV E-Z Installation data down-
loads; however, Pro:Centric application data will not be
downloaded, i.e., Installer Menu item 098 PRO:CENTRIC
will be set to 0.
3. Refer to the appropriate subsection below, depending on the
Pro:Centric server configuration, to complete the remaining
fields.
RF Configuration
a) In the Media Type
field,
use the Left/Right arrow keys to
select
RF
.
b)
In the Data Channel field, either key in or use the Left/
Right arrow keys to select the RF channel number that
will be used by the Pro:Centric server as its data channel.
The Data Channel value can be set from 1 to 135.
*
*
PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies.
Z
EZ-Manager Wizard
Back
Manual Pro:Centric
4
3
2
1
Searching for Pro:Centric Server...
Exit
It may take 1 min 32 second(s).
This step automatically searches for the Pro:Centric server.
If there is no Pro:Centric Server installed, you do not need to continue
with this procedure. Please select either ‘Exit’ or ‘Manual Pro:Centric’.
Status : Tuning channel 49
TV is now searching all of the channels for the data channel...
EZ-Manager Wizard
Pro:Centric Mode
Media Type
Data Channel
Signal Strength
Signal Quality
RF
GEM
< >
Back
Next
Exit
Pro:Centric Manual Configuration
0%
0%
No signal
1
Pro:Centric Manual Configuration Screen with
RF Media Fields
4
3
2
1
EZ-Manager Wizard
EZ-Manager Configuration Complete
Pro:Centric Application
Maintenance Files
GEM application downloaded
LX570H_Config.tlx
Installed Components
2
1
3
The TV will turn off in 3 second(s).
4
Reboot
Turn Off
(Continued on next page)
